چکیده :

paper proposes a simple and passive harmonic reduction method at dc link of 20-pulse rectifier. The 20-pulse topology is obtained via two paralleled ten-pulse ac-dc converters each of them consisting of a five-phase (five-leg) diode bridge rectifier. For independent operation of the paralleled diode-bridge rectifiers, a zero sequence blocking transformer (ZSBT) is designed and implemented. Connection of a tapped inter-phase transformer (IPT) at the output of the ZSBT results in doubling the number of the output voltage pulses. The application of the pulse doubling technique with a low power rating (2% of the load power rating) results in a simpler and more economical configuration of the whole system and increased number of pulses. The design is suitable for retrofit applications where a six-pulse diode bridge rectifier is being utilized. The proposed structure is simulated using Matlab/Simulink software under different loading conditions. The simulation results confirm the significant improvement of the power quality indices (IEEE-519 standard requirements) at the point of common coupling. Experimental results are obtained using the designed and constructed laboratory prototype of the proposed converter to validate the design procedure and the simulation results. The VA rating of the magnetic circuit is calculated to confirm the savings in space, volume, weight, and cost of the proposed configuration.

کلید واژگان :

AC–DC converter, passive harmonic reduction, 20 pulse rectifier, direct torque controlled induction motor drive (DTCIMD)



ارزش ریالی : 500000 ریال
دریافت مقاله
با پرداخت الکترونیک