In geotechnical engineering, stabilization of slopes is one of the significant issues that needs to be considered especially in seismic situation. Evaluation and precise prediction of factor of safety (FOS) of slopes can be useful for designing/analyzing very important structures such as dams and highways. Hence, in the present study, an attempt has been done to evaluate/predict FOS of many homogenous slopes in different conditions using Monte Carlo (MC) simulation technique. For achieving this aim, the most important parameters on the FOS were investigated, and finally, slope height (H), slope angle (α), cohesion (C), angle of internal friction (∅) and peak ground acceleration (PGA) were selected as model inputs to estimate FOS values. In the first step of analysis, a multiple linear regression (MLR) equation was developed and then it was used for evaluation and prediction by MC technique.Generally, MC model simulated FOS of less than 1.18, lower and higher than measured and predicted FOS values, respectively. However, the results of MC simulation for the FOS values of more than 1.33, is higher than those measured and predicted FOS values. As a result, the mean of FOS values simulated by MC was very close to the mean of actual FOS values. Moreover, results of sensitivity analysis demonstrated that the (∅), among other parameters, is the most effective one on FOS. The obtained results indicated that MC is a reliable approach for evaluating and estimating FOS of slopes with high degree of performance.
کلید واژگان :Seismic FOS · Monte Carlo simulation · Multiple linear regression · Sensitivity analysis
ارزش ریالی : 600000 ریال
با پرداخت الکترونیک