The selection of suitable overburden loosening method has a crucial importance in several applications of geotechnical engineering. Factors such as rock properties and environmental constrains play a significant role in the selection of the needed equipment for overburden loosening. This paper presents several new models/ equations for prediction of ripping production (Q) using rock material properties. To this end, three sites in Malaysia were selected and a total of 52 direct ripping tests were conducted in Johor state on sandstone and shale rock types. In addition, using the collected block samples, point load test, Brazilian test, slake-durability test, p-wave velocity test and uniaxial compressive strength test were also carried out in the laboratory. Numerous equations have been proposed to predict Q considering simple regression, linear multiple regression (LMR), and non-linear multiple regression (NLMR) models. Simple regression analysis indicated that the relationships between rock material properties and Q were meaningful and acceptable. Furthermore, both LMR and NLMR equations indicated similar performance capacity in predicting Q. Nevertheless; the use of NLMR equations resulted in prediction performance with higher accuracy in estimating Q compared to LMR equations.
کلید واژگان :Ripping production Laboratory test Simple regression analysis Linear multiple regression Non-linear multiple regression
ارزش ریالی : 600000 ریال
با پرداخت الکترونیک