Effect of Sub-Zero Treatment on Fatigue Strength of Aluminum 2024

Challenge of change of alloy properties during service life of extra safety parts was always considered by industrialists and consequently researchers. Fuselage and wings of airplane repeatedly in ascent and descent is affected respectively by cooling to -55 0C and heating to room temperature. Hence, the effect of above temperature changes on tensile and fatigue strengths are unknown. In this study in laboratory, the situation of airplane body is tried to simulate and then the changes of microstructure and consequently the changes of tensile properties and hardness after holding for 10 and 4 hours were studied respectively in temperatures of -60C and -196C. Results showed that by using of sub-zero treatment, hardness is without change but tensile properties are increased to control specimen. In addition, after sub-zero treatment, the fatigue limit of the control specimen has reduced at least 20%.

Population density of particles, Liquid nitrogen, Cryogenic treatment, Fatigue limit