Thermal energy storage (TES) plays an important role in the development of an efficient solar energy system by storing the solar energy when available during the daytime and use it at night when required. The main component of a TES system is encapsulated phase change materials in macro, micro and nano sacles. Microencapsulated lauric acid (LA) as a renewable (obtained from vegetable oils) and non-toxic Phase Change Material (PCM) with a polystyrene shell was prepared using an emulsion polymerization technique. The individual and interactive effects of operating variables including lauric acid to styrene mass ratio, sodium dodecyl sulfate (SDS) to styrene (St) mass ratio, stirring rate and temperature on the microencapsulation ratio (ME.R) were investigated. Response surface method was applied to the statistical design, analysis of experiments and process optimization. Analysis of Variance (ANOVA) showed that the interaction between the stirring rate and temperature had non-significant effects on ME.R (%). The maximum achieved value of ME.R was 92.3% in the process optimization. It was enhanced compared with microencapsulation ratio of lauric acid in previous studies. By using the optimal values, LA/St mass ratio of 0.42, emulsifier (SDS) to styrene mass ratio of 0.01, stirring rate of 1076 rpm and the temperature of 55 C, ME.R of 91.64% was obtained. Thermal properties, morphology and thermal stability of the optimal microcapsules were studied using DSC thermograms, Scanning Electron Microscopy (SEM) and thermogravimetry analysis (TGA), respectively. The results showed that microencapsulated renewable PCM with a melting point of 43.77 C and latent heat of 167.26 kJ/kg has a good potential for utilizing renewable solar energy.
کلید واژگان :Lauric acid Renewable Phase Change Material (PCM) Microencapsulation Response Surface Methodology (RSM) Process optimization Emulsion polymerization
ارزش ریالی : 600000 ریال
با پرداخت الکترونیک